Originally posted 2017-09-22 13:24:52. Home Automation This is Part 2 of our Home Automation article following on from Part 1 here. Home assistant allows you to use a URL as a command to trigger actions. This can be either on your home network or on the Internet. So the next step we need to follow is to get a Web command from a browser to trigger our Home Assistant and turn our lights on or off. This is more complicated than it sounds but paradoxically easier as well. A couple of things we need to bear in mind. First, to
Originally posted 2018-04-21 10:13:41. This tutorial covers the ways to integrate a Sonoff S22 switch into Home Assistant using Sonoff MQTT and flashing Tasmota to replace the supplied Sonoff firmware. I’m going to cover two different methods to get the switch working in Home Assistant. The first just uses the S22 as it comes out-of-the-box. The second requires flashing Tasmota onto the switch and setting up MQTT in Home Assistant. Honestly sometimes it seems MQTT is build up as the greatest thing and it is useful however depending on what you want to achievt, it’s not necessarily the best option.
Originally posted 2017-09-22 12:07:35. Home Automation The next logical step with Home Automation and my Google Home is to integrate some LED lights so I started doing some research and came across the Limitless LED lights. As it turns out, I didn’t look far enough and ended up with a few challenges getting everything working. Even posting on and searching forums I found that there was so much assumed knowledge and jargon that it was difficult to get to where I needed to be. So this post chronicles my journey into Home Automation nirvana (for now and for LED Lights