Originally posted 2018-04-21 10:13:41. This tutorial covers the ways to integrate a Sonoff S22 switch into Home Assistant using Sonoff MQTT and flashing Tasmota to replace the supplied Sonoff firmware. I’m going to cover two different methods to get the switch working in Home Assistant. The first just uses the S22 as it comes out-of-the-box. The second requires flashing Tasmota onto the switch and setting up MQTT in Home Assistant. Honestly sometimes it seems MQTT is build up as the greatest thing and it is useful however depending on what you want to achievt, it’s not necessarily the best option.
Originally posted 2018-03-23 12:28:35. In a previous article, I blogged about Integrating Google Home with Home Assistant. In that article I made a connection between doing this and setting up automations which is incorrect. So in this article, I want to correct the record and make the correct case for automations. So what’s wrong with doing it like this? Well these automations will ‘work’ in that if you click on the text and click on trigger, they will turn the light on or off then and there. But how is that better than just clicking the on/off toggle on the
Originally posted 2017-09-22 12:07:35. Home Automation The next logical step with Home Automation and my Google Home is to integrate some LED lights so I started doing some research and came across the Limitless LED lights. As it turns out, I didn’t look far enough and ended up with a few challenges getting everything working. Even posting on and searching forums I found that there was so much assumed knowledge and jargon that it was difficult to get to where I needed to be. So this post chronicles my journey into Home Automation nirvana (for now and for LED Lights
Originally posted 2017-11-27 15:06:32. Further to my earlier articles in this series about integrating Google Home with Home Assistant I have made a few changes to my configuration. You might remember that I used the all-in-one setup of Home Assistant for Raspberry Pi. There are (were) 3 different ways of setting up Home Assistant on a Raspberry Pi – the all-in-one method as it turns out was probably the original way and wouldn’t you know it, the month after I set it all up it was ‘depreciated’ and no longer supported for new installations although existing installations can continue to
Originally posted 2018-08-27 16:37:41. How to use Hass.io and boot off a USB stick. This is an update of my previous article here. In order to not create more confusion I decided to do a new blog post about this here. The whole installation of home assistant can be somewhat confusing for someone who is new and sometimes the documents on the Home Assistant site are confusing or as often happens, 100% clear when you have already worked out what you want to know. The ‘preferred’ installation method for home assistant promoted on https://www.home-assistant.io/ is to install Hass.io This installation